Datasheet4U Logo Datasheet4U.com

ALN0892R2 - Internally Matched LNA Module

Description

The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on

Features

  • S21 = 35.5 dB @ 824 MHz = 34.5 dB @ 894 MHz.
  • S21 = 35 dB @ 890 MHz = 34 dB @ 960 MHz.
  • NF of 0.7~0.72 dB over Frequency.
  • Unconditionally Stable.
  • Single 5V Supply.
  • High OIP3 @ Low Current Specifications (in Production) Typ. @ T = 25°C, Vs = 5 V, Freq. = 859.925 MHz, Zo. sys = 50 ohm 2-stage Single Type Specifications Parameter Frequency Range Gain Gain Flatness Noise Figure Output IP3 S11 / S22 (1) (2) Unit Min MHz dB dB dB dBm dB dBm 20 34 824 34 CDMA Typ 35 ± 0.

📥 Download Datasheet

Datasheet Details

Part number ALN0892R2
Manufacturer Advanced Semiconductor
File Size 863.48 KB
Description Internally Matched LNA Module
Datasheet download datasheet ALN0892R2 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ALN0838AT Internally Matched LNA ASB
ALN0839AT Internally Matched LNA ASB
ALN0859 Low Noise Amplifier ETC
ALN0070 Internally Matched LNA Module ASB
ALN0070WT Internally Matched LNA ASB

Other Datasheets by Advanced Semiconductor

Part Number Description
ALN0892 Internally Matched LNA Module
ALN0892T1 Internally Matched LNA Module
ALN0810 Internally Matched LNA Module
ALN0832 Internally Matched LNA Module
ALN0836 Internally Matched LNA Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
plerowTM ALN0892R2 www.DataSheet4U.com Internally Matched LNA Module Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment.
Published: |